Der
in den USA bereits seit über 25 Jahren bewährte Rapid Set Concrete wird
mittlerweile weltweit für unterschiedlichste Infrastrukturprojekte
eingesetzt. Aufgrund der sehr schnellen Erhärtung des Betons können
Instandsetzungsmaßnahmen zu verkehrsberuhigten Zeiten, z.B. Nachts,
erfolgen. Rapid Set Concrete wurde gem. der Festbetonprüfungen
„Technische Lieferbedingungen für Baustoffe und Baustoffgemische für die
Bauliche Erhaltung von Verkehrsflächenbefestigungen – Betonbauweisen“
(TL BEB-StB) geprüft. Die nach TL BEB-StB geforderten Frühfestigkeiten
(≥ 20 MPa nach 5 Stunden) werden bereits nach 2 Stunden zielsicher
erreicht.
Rapid Set Concrete
Für die Sanierung von Betonplatten im Infrastrukturbereich, wie Betonfahrbahnen oder Flugbetriebs-flächen, mit hoher Dauerhaftigkeit aufgrund von Volumenstabilität, hohen Betonendfestigkeiten sowie Sulfatbeständigkeit. Festbetonprüfungen gemäß Technische Lieferbedingungen für Baustoffe und Baustoffgemische für die bauliche Erhaltung von Verkehrsflächenbefestigungen (TL BEB-StB).
Kategorien Alle, Schnellbetonsysteme
Ähnliche Produkte
-
KOROPOX
KOROPOX is a 2-component, water emulsifiable, transparent impregnation on epoxy-resin basis (concentrate) to improve surfaces of mineral sub-bases. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and become increasingly shiny. The surface remains open to diffusion.
-
NEODUR HE 65 plus
NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities
- NEODUR HE 65 Plus: on the basis of KORODUR VS 0/5
- NEODUR HE 65 Plus SVS 3: on the basis of KORODUR WH-Special
Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.
-
NEODUR HE 65 SVS 3
NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualitites
- NEODUR HE 65: on the basis of KORODUR VS 0/5
- NEODUR HE 65 SVS 3: on the basis of KORODUR WH-Special
- NEODUR HE 65 SVS 1,5: on the basis of KORODUR Diamond Concrete
Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.
Also available in colour, see KORODUR colour chart.
-
KORODUR WH-metallic
KORODUR WH-metallic is a metallic hard aggregate acc. to DIN 1100 (coating group M) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.
KORODUR WH-metallic is mixed with cement and optionally with the additive KOROTAN.