KORODUR 0/4

KORODUR 0/4 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

KORODUR 0/4 is mixed with cement and optionally with the additive KOROTAN.

SKU 1120002S25KG Categories , ,

KORODUR 0/4 – hard aggregate acc. to DIN 1100 – A 0/4 – mineral hard aggregate producted from high grade components including quartz sand and tough by-products of electrometallurgical melting process. This special mixture guarantees outstanding tensile and compressive strength values, very favourable wearing properties and imparts stable anti-skid properties to industrial flooring surfaces.

Application
For use in hard aggregate concrete screeds acc. to DIN 18560, ZE 65 A. For use in areas of combined rolling, ramming and grinding stress, percussion, pressure and impact. Able to withstand the sliding and rolling of work parts, plant traffic of all kinds, fork-lift traffic, crawler tractor traffic and transporting equipment with steel wheels etc. Especially qualified for wet rooms, parking areas, driving and loading ramps, bunker linings and outdoor surfaces of all kinds.

Technical data
Grain size0 – 4 mm
Compressive strength70 N/mm²
Tensile strength10 N/mm²
Wear resistance≤ 5 cm³/50 cm²

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KORODUR HB 5 rapid

    KORODUR HB 5 rapid is a fast-setting, mineral, ready to use system bonding compound for the full bond of NEODUR HE 60 rapid and fast screeds produced with KORODUR FSCem on set concrete.

  • NEODUR HE 3

    For the production of heavy-duty industrial floors, e.g. car parks, industrial halls, assembly halls, aircraft hangars, workshops, high-bay warehouses and other industrial areas subjected to most severe stress. Indoors and outdoors.

  • GRANIDUR BIANCO/NERO

    Use for polished, decorative screeds in a middle layer thickness of 15 mm in sales rooms, museums, show rooms, boutiques, foyers, office and administrative buildings, restaurants, galleries etc.

  • KORODUR WH-Special

    KORODUR WH-Special is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3. KORODUR WH-Special ist particularly impact resistant. Although classified in group A, wear resistance values of 3 cm³/50 cm² as per group M are achieved.

    KORODUR WH-Special is mixed with cement and optionally with the additive KOROTAN.

See More