KORODUR Diamond Concrete

KORODUR Diamond Concrete is a hard aggregate acc. to DIN 1100 (coating group KS) for the porduction of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

KORODUR Diamond Concrete is mixed with cement and optionally with the additive KOROTAN.

SKU 1120012S30KG Categories , ,

KORODUR Diamond Concrete – hard aggregate acc. to DIN 1100 – KS 0/4. KORODUR Diamond Concrete – hard aggregate produced from electrocorundum and silicon carbide. Highest grade aggregates for surfaces subject to the most severe stress together with optimum anti-skid property and the highest wear resistance.

Application
For use hard aggregate concrete screeds acc. to DIN 18560 – ZE 65 KS-F. Specially suitable in areas where an extremely high degree of skid and wear resistance is required, specially when subjected to sliding stress.

Technical date
Grain size0 – 4 mm
Compressive strength70 N/mm²
Tensile strength10 N/mm²
Wear resistance≤ 1,5 cm³/50 cm²

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KOROMINERAL

    KOROMINERAL is a liquid, transparent impregnation on silicate basis for the improvement of mineral surfaces. Due to the increasing silicification, the cement matrix improves in the course of time. A significant improvement of the wear resistance is not possible.

  • KOROPOX

    KOROPOX is a 2-component, water emulsifiable, transparent impregnation on epoxy-resin basis (concentrate) to improve surfaces of mineral sub-bases. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and become increasingly shiny. The surface remains open to diffusion.

  • KOROTEX

    KOROTEX is a liquid, solvent-free, acrylic resin dispersion that after drying produces a transparent and slightly shiny film that protects the industrial floor, concrete or cement screed, effectively from premature drying out and prevents possible damage (crack formation, surface damage) due to insufficient after-treatment.

  • KORODUR WH-Special

    KORODUR WH-Special is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3. KORODUR WH-Special ist particularly impact resistant. Although classified in group A, wear resistance values of 3 cm³/50 cm² as per group M are achieved.

    KORODUR WH-Special is mixed with cement and optionally with the additive KOROTAN.

See More