KORODUR COPETTI FLOOR KCF

KCF 05 and KCF 08 are installed in one or two layers acc. to

  • DIN 18560-2 screeds and heated screeds on insulation layer
  • DIN 18560-3 bonded screeds with KORODUR HB 5 bonding compound (see data sheet)
  • DIN 18560-4 screeds on separation layer

KCF 05 is also available as fast-setting variant as KCF 05 rapid (with dimensionally stable binder on ternary basis).

SKU KCF 05: 1220217S25KG; KCF 08: 1220215S25KG Categories ,

KCF 05 and KCF 08 – factory produced, ready to use, coloured dry mortars for the production of smoothed, decorative screeds in a layer thickness of 15 to max.70 mm, depending on the construction.

Colours: cement-grey, light-grey, basalt-grey, anthracite, beige, red, olive

KCF 05 and KCF 08 – applied in one or two layers acc. to

  • DIN 18560-2 screeds and heating screeds on insulation layer
  • DIN 18560-3 composite screeds with KORODUR Bonding Compound HB 5
  • DIN 18560-4 screeds on separation layer

Fields of application
Sales rooms, museums, exposition rooms, boutiques, lobbies, office and administration buildings, restaurants, galleries.

Technical data KCF 05
Grain size0 – 5 mm
Compressive strength45 N/mm²
Tensile strength6 N/mm²
Wear resistance≤ 5 cm³/50 cm²
Layer thickness15 – 25 mm
Technical data KCF 08
Grain size0 – 8 mm
Compressive strength35 N/mm²
Tensile strength5 N/mm²
Wear resistance≤ 5 cm³/50 cm²
Layer thickness25 – 50 mm

Basically the current technical data sheet refers.

Additional system components

  • Primer
  • Surface treatment KOROCLEAN
  • Maintenance systems
    • OBTEGO Porenfüller P 20
    • OBTEGO Fleckschutz R 400

Downloads

Additional Information

Related products

  • KORODUR HB 5

    KORODUR HB 5 is a mineral, ready to use bonding compound for the full bond of cementitious screeds of all grades, including KORODUR hard aggregate screeds, on set concrete.

  • NEODUR HE 40 and HE 40/8

    NEODUR HE 40 is a ready to use, cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualities

    • NEODUR HE 40: layer thickness fresh on fresh up to 15 mm
    • NEODUR HE 40: layer thickness as bonded screed up to 35 mm
    • NEODUR HE 40/8: layer thickness as bonded screed up to 50 mm

    Processing in one layer as bonded screed for heavy-duty stress acc. to DIN 18560-7.

  • NEODUR HE 65 SVS 3

    NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualitites

    • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
    • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

  • KORODUR WH-Special

    KORODUR WH-Special is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3. KORODUR WH-Special ist particularly impact resistant. Although classified in group A, wear resistance values of 3 cm³/50 cm² as per group M are achieved.

    KORODUR WH-Special is mixed with cement and optionally with the additive KOROTAN.

See More