KOROPOX

KOROPOX is a 2-component, water emulsifiable, transparent impregnation on epoxy-resin basis (concentrate) to improve surfaces of mineral sub-bases. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and become increasingly shiny. The surface remains open to diffusion.

SKU Komponente A: 1320593; Komponente B: 1320592 Categories , ,

KOROPOX is a water-emulsifying, transparent 2-components system on epoxy-resin basis (concentrate) for the impregnation of cementitious subbases. Excellently suitable for KOROPLAN, KORODUR and NEODUR industrial floors.

KOROPOX increases the tightness and resistance against water, grease, oil, mineral oil, fuel, brakefluids etc.

Technical data
Formliquid
Colourcolorless
Density g/cm³1,0

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KORODUR HB 5 rapid

    KORODUR HB 5 rapid is a fast-setting, mineral, ready to use system bonding compound for the full bond of NEODUR HE 60 rapid and fast screeds produced with KORODUR FSCem on set concrete.

  • KOROMINERAL CURE

    KOROMINERAL CURE is a liquid, one-component, membrane-forming curing compound to prevent premature drying out in combination with silicatization.

    KOROMINERAL CURE provides long-lasting protection against moisture, dirt and wear. The silicate penetrates deeply in the pores of the concrete, reacts with the free calcium and forms a durable bond with the concrete, both indoors and outdoors. After the application, the surface is dust-proof and water-repellent. KOROMINERAL CURE dries transparently.

  • NEODUR HE 65 SVS 1,5 extra

    NEODUR HE 65 SVS 1,5 extra is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates.

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

  • KORODUR COPETTI FLOOR KCF

    KCF 05 and KCF 08 are installed in one or two layers acc. to

    • DIN 18560-2 screeds and heated screeds on insulation layer
    • DIN 18560-3 bonded screeds with KORODUR HB 5 bonding compound (see data sheet)
    • DIN 18560-4 screeds on separation layer

    KCF 05 is also available as fast-setting variant as KCF 05 rapid (with dimensionally stable binder on ternary basis).

See More