KOROCLEAN

KOROCLEAN

Industrial floors are extremely heavily stressed components that require special consideration both during production and cleaning, because they are subject to extraordinary wear and tear. The requirements for an industrial floor include high compressive strength, abrasion resistance, impact strength, structural density, work safety as well as appearance and cleanability. KORODUR and NEODUR hard aggregate industrial screeds meet all these requirements and offer maximum long-term benefits.

Categories ,

Downloads

Additional Information

Related products

  • NEODUR HE 40 and HE 40/8

    NEODUR HE 40 and HE 40/8

    NEODUR HE 40 is a ready to use, cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualities

    • NEODUR HE 40: layer thickness fresh on fresh up to 15 mm
    • NEODUR HE 40: layer thickness as bonded screed up to 35 mm
    • NEODUR HE 40/8: layer thickness as bonded screed up to 50 mm

    Processing in one layer as bonded screed for heavy-duty stress acc. to DIN 18560-7.

  • NEODUR HE 65 plus

    NEODUR HE 65 plus

    NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities

    • NEODUR HE 65 Plus:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 Plus SVS 3:        on the basis of KORODUR WH-Special

    Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.

  • NEODUR HE 65 metallic

    NEODUR HE 65 metallic

    NEODUR HE 65 metallic is a ready to use cementitious hard aggregate screed with metallic aggregates on the basis of KORODUR hard aggregates acc. to DIN 110 (group M) on the basis of KORODUR WH-metallic.

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

  • NEODUR HE 3

    NEODUR HE 3

    For the production of heavy-duty industrial floors, e.g. car parks, industrial halls, assembly halls, aircraft hangars, workshops, high-bay warehouses and other industrial areas subjected to most severe stress. Indoors and outdoors.

See More