NEODUR HE 2

For the production of industrial floors to improve the surface hardness and to increase the wear resistance of the floor being subjected to direct industrial stress, e.g. high-bay warehouses, logistics areas, sales areas, etc. Indoors and outdoors.

SKU 1220118S25KG Categories , ,

NEODUR HE 2 acc. to DIN 18557 (factory mortars) and DIN EN 13813, ready to use, cementitious dry mortars for the production of industrial floors in dry-shake method. Available colours, see our KORODUR colour chart.

Application
For industrial floors to improve the surface hardness and the wear resistance of the floors being subjected to direct industrial stress. Indoors and outdoors.

Technical data
Grain size0 – 3 mm
Compressive strength70 N/mm²
Tensile strength9 N/mm²
Wear resistance≤ 8 cm³/ 50 cm²

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KOROPOX

    KOROPOX is a 2-component, water emulsifiable, transparent impregnation on epoxy-resin basis (concentrate) to improve surfaces of mineral sub-bases. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and become increasingly shiny. The surface remains open to diffusion.

  • NEODUR HE 40 and HE 40/8

    NEODUR HE 40 is a ready to use, cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualities

    • NEODUR HE 40: layer thickness fresh on fresh up to 15 mm
    • NEODUR HE 40: layer thickness as bonded screed up to 35 mm
    • NEODUR HE 40/8: layer thickness as bonded screed up to 50 mm

    Processing in one layer as bonded screed for heavy-duty stress acc. to DIN 18560-7.

  • NEODUR HE 65 SVS 1,5 extra

    NEODUR HE 65 SVS 1,5 extra is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates.

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

  • KORODUR COPETTI FLOOR KCF

    KCF 05 and KCF 08 are installed in one or two layers acc. to

    • DIN 18560-2 screeds and heated screeds on insulation layer
    • DIN 18560-3 bonded screeds with KORODUR HB 5 bonding compound (see data sheet)
    • DIN 18560-4 screeds on separation layer

    KCF 05 is also available as fast-setting variant as KCF 05 rapid (with dimensionally stable binder on ternary basis).

See More