KORODUR FSCem

For the production of cement screeds which are quickly ready for covering, indoors and outdoors:
• as bonded screed
• on separation layer
• on insulation layer
• as heated screed
As sub-base for the installation of KORODUR/NEODUR screeds, KORODUR decorative screeds, coatings, tiles, natural stone tiles, cast concrete tiles, parquet, laminate, elastic and textile coverings. With KORODUR FSCem also wear-resistant screeds can be produced e.g. by adding the hard aggregate KORODUR VS 0/5. KORODUR FSCem is also suitable for the repair and renovation of worn concrete floors, the repair of cementitious sub-bases for screed installation as well as for the setting of ground anchors and fence posts.

SKU 1220527S25KG Categories , ,

KORODUR FSCem is a cementitious, low-shrinkage rapid-setting screed binder on ternary basis for the production of heavy-duty screeds which are quickly usable and early ready for covering, acc. to DIN 18560 and EN 13813 (strength classes CT-C50-F7 to CT-C40-F6).

Application
KORODUR FSCem is used for the installation of cement screeds which are quickly ready for covering, indoors and outdoors

  • on separation layer
  • in compound
  • on insulation layer
  • as heating screed

as sub-base for the installation of

  • KORODUR/NEODUR screeds
  • KORODUR decorative screeds
  • coatings
  • tiles
  • natural stone tiles
  • concrete stone tiles
  • parquet and laminate
  • elastic and textile coverings
Technical data
Mixing ratio
as an example 1:4
in weight units*
Quality CT-C50-F7		KORODUR FSCem
screed sand A8 – B8
water/cement ratio		75 kg
300 kg
approx. 0,42
Mixing ratio
as an example 1:5
in weight units*
Quality CT-C40-F6		KORODUR FSCem
screed sand A8 – B8
water/cement ratio		60 kg
300 kg
approx. 0,40
Residual moistureCM-measurement after installation
mixing ratio 1:4 and 1:5,
see above		after 24 hours approx. 5,9 %
after 3 days approx. 1,9 %
after 28 days approx. 1,3 %

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KOROPOX

    KOROPOX is a 2-component, water emulsifiable, transparent impregnation on epoxy-resin basis (concentrate) to improve surfaces of mineral sub-bases. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and become increasingly shiny. The surface remains open to diffusion.

  • KOROTEX

    KOROTEX is a liquid, solvent-free, acrylic resin dispersion that after drying produces a transparent and slightly shiny film that protects the industrial floor, concrete or cement screed, effectively from premature drying out and prevents possible damage (crack formation, surface damage) due to insufficient after-treatment.

  • NEODUR HE 65

    NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualities

    • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
    • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

     

  • GRANIDUR BIANCO/NERO

    Use for polished, decorative screeds in a middle layer thickness of 15 mm in sales rooms, museums, show rooms, boutiques, foyers, office and administrative buildings, restaurants, galleries etc.

See More