KORODUR FSCem Screed

For the production of cement screeds that can be quickly covered, e.g. as underlayment screed up to layer thickness of maximum 120 mm, indoors and outdoors:
• on separation layer
• as bonded screed
• on insulation layer
• as heated screed
As sub-base for the installation of KORODUR/NEODUR hard aggregate screeds, KORODUR decorative screeds, coatings, ceramic tiles, natural stone tiles, cast concrete tiles, parquet and laminate as well as elastic and textile coverings. KORODUR FSCem Screed is also suitable for the repair and renovation of worn concrete floors, the repair of cementitious sub-bases for screed installation as well as for the setting of ground anchors and fence posts. KORODUR FSCem Screed must always receive a covering layer.

SKU 1220529S25KG Categories , ,

KORODUR FSCem Screed is a dimensional stable, low shrinkage, fast setting screed dry mortar on ternary basis for the production of screeds that are early ready for covering, for layer thickness up to 120 mm acc. to  DIN 18560 and DIN EN 13813 (quality CT-C40-F6).
For the production of cement screeds that can be quickly covered, e.g. as underlayment screed up to layer thickness of maximum 120 mm, indoors and outdoors

  • on separation layer
  • as bonded screed
  • on insulation layer
  • as heated screed

 Ready for covering already after 3 days as sub-base for the application of

  • KORODUR/NEODUR hard aggregate screeds
  • KORODUR decorative screeds
  • Coatings
  • Ceramic tiles
  • Natural stone tiles
  • Cast concrete tiles
  • Parquet and laminate
  • Elastic and textile coverings

 KORODUR FSCem Screed is also suitable for the repair and renovation of worn concrete floors, the repair of cementitious sub-bases for screed installation as well as for the setting of ground anchors and fence posts. KORODUR FSCem screed must always receive a covering layer.

Technical data
Granulometry0 – 6 mm
Compressive strength (N/mm²)
measured at defined prisms acc. to DIN EN 13892-2		after 1 day approx. 20 N/mm²
after 28 days approx. 40 N/mm²
Flexural strength (N/mm²)
measured at defined prisms acc. to DIN EN 13892-2		after 1 day approx. 4 N/mm²
after 28 days approx. 6 N/mm²
shrinkage class acc. to. DIN 18560-1SW 1 low shrinkage (< 0,2 mm/m)

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KOROTEX

    KOROTEX is a liquid, solvent-free, acrylic resin dispersion that after drying produces a transparent and slightly shiny film that protects the industrial floor, concrete or cement screed, effectively from premature drying out and prevents possible damage (crack formation, surface damage) due to insufficient after-treatment.

  • NEODUR HE 65 metallic

    NEODUR HE 65 metallic is a ready to use cementitious hard aggregate screed with metallic aggregates on the basis of KORODUR hard aggregates acc. to DIN 110 (group M) on the basis of KORODUR WH-metallic.

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

  • NEODUR HE 65

    NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualities

    • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
    • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

     

  • KORODUR COPETTI FLOOR KCF

    KCF 05 and KCF 08 are installed in one or two layers acc. to

    • DIN 18560-2 screeds and heated screeds on insulation layer
    • DIN 18560-3 bonded screeds with KORODUR HB 5 bonding compound (see data sheet)
    • DIN 18560-4 screeds on separation layer

    KCF 05 is also available as fast-setting variant as KCF 05 rapid (with dimensionally stable binder on ternary basis).

See More