NEODUR Level

For the production of direct wearing layers, bonded on mineral concrete sub-bases or cement screeds, as industrial floor for new construction and repair, e.g. in service and store rooms, production halls, underground car parks, sales rooms etc.

SKU 1220285S25KG Categories , , ,

NEODUR Level – cementitious, mineral, fast-setting, polymer-modified, thin-layer industrial floor for layer thickness of 4 to 30 mm, CT-C40-F8-AR0,5.

Application

  • for sales rooms
  • for new construction and restoration of storage areas and production halls
  • in composite on mineral sub-base
  • for underground carparks
Technical data
Layer thickness4 – 30 mm
Walkabilityafter approx. 3 hours
Compressive strength≥ 35 N/mm²
Tensile strength≥ 8 N/mm²

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KORODUR PC

    KORODUR PC is a liquid, solvent-free, one-component, water dilutable, synthetic resin dispersion for pre-treatment of absorbent sub-bases for self-leveling NEODUR Level coatings.

  • KORODUR HB 5 rapid

    KORODUR HB 5 rapid is a fast-setting, mineral, ready to use system bonding compound for the full bond of NEODUR HE 60 rapid and fast screeds produced with KORODUR FSCem on set concrete.

  • NEODUR HE 65 SVS 1,5

    NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualities

    • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
    • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

  • KORODUR Diamond Concrete

    KORODUR Diamond Concrete is a hard aggregate acc. to DIN 1100 (coating group KS) for the porduction of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR Diamond Concrete is mixed with cement and optionally with the additive KOROTAN.

See More