KORODUR TXPK

KORODUR TXPK is used as primer on concrete and screed surfaces where a later moisture exposure of the back has to be expected.

SKU 1320608 Categories , ,

KORODUR TXPK is a 2-component epoxy resin special primer for self-leveling coatings such as TRU Self-Leveling, LevelFlor, NEODUR Level products etc. KORODUR TXPK is used as primer on concrete and screed surfaces, where a later moisture exposure on the back has to be considered.

KORODUR TXPK meets the guidelines of AgBB with respect to the lowest possible degree of emissions related to indoor air pollution, for the use in commercial areas as primer on concrete and screed sub-bases for self-leveling coatings.

Technical data
Colourwhite (off-white)
Densityapprox. 1,10 g/cm³
Viscosityapprox. 750 mPa s ± 100
Compressive strengthapprox. 60 N/mm²
Flexural strengthapprox. 30 N/mm²
Modulus of elasticityapprox. 2.000 N/mm²

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KORODUR HB 5 rapid

    KORODUR HB 5 rapid is a fast-setting, mineral, ready to use system bonding compound for the full bond of NEODUR HE 60 rapid and fast screeds produced with KORODUR FSCem on set concrete.

  • NEODUR HE 65 plus SVS 3

    NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities

    • NEODUR HE 65 Plus:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 Plus SVS 3:        on the basis of KORODUR WH-Special

    Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.

  • GRANIDUR BIANCO/NERO

    Use for polished, decorative screeds in a middle layer thickness of 15 mm in sales rooms, museums, show rooms, boutiques, foyers, office and administrative buildings, restaurants, galleries etc.

  • KORODUR VS 0/5

    KORODUR VS 0/5 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR VS 0/5 is mixed with cement and optionally with the additive KOROTAN.

See More