KORODUR easyFinish

KORODUR easyFinish can be used for the production of concrete and screed surfaces, on fresh to matt damp surfaces as a smoothing aid.

SKU 1320570G30KG Categories , ,

KORODUR easyFinish is a processing and smoothing aid for NEODUR HE 60 rapid and KOROCRETE that is liquid, solvent-free and ready for use. Spray KORODUR easyFinish onto the troweled (disk) NEODUR HE 60 rapid or KOROCRETE surface and work it in before the first trowel pass with helicopter. The smoothing process is facilitated, the surface additionally modified, the density increased and the protection against chemical attacks improved.

Technical data
Formliquid
Colourbluish
Density1,0 +/- 0,02 kg/m³

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KOROPOX

    KOROPOX is a 2-component, water emulsifiable, transparent impregnation on epoxy-resin basis (concentrate) to improve surfaces of mineral sub-bases. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and become increasingly shiny. The surface remains open to diffusion.

  • NEODUR HE 65 plus

    NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities

    • NEODUR HE 65 Plus:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 Plus SVS 3:        on the basis of KORODUR WH-Special

    Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.

  • NEODUR HE 65 SVS 1,5 extra

    NEODUR HE 65 SVS 1,5 extra is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates.

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

  • KORODUR WH-metallic

    KORODUR WH-metallic is a metallic hard aggregate acc. to DIN 1100 (coating group M) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR WH-metallic is mixed with cement and optionally with the additive KOROTAN.

See More