NEODUR PFM 1-K Easyfix

NEODUR PFM 1-K Easyfix is ready-mixed, vacuum-packed, easy to process, for the pointing and repair of paved areas. Only for use in pedestrian areas, such as e.g. terraces, walkways etc., for joint width from 5 mm on and joint depth from 30 mm on. The grouted stone surface remains nearly free of resin-film.

SKU 1220392 Categories ,

NEODUR PFM 1-K Easyfix is a ready-mixed one-component paving joint mortar.

Application
NEODUR PFM 1-K Easyfix is ready-mixed, vacuum-packed, easy to process, for the pointing and repair of paved areas. Only for use in pedestrian areas, such as e.g. terraces, walkways etc., for joint width from 5 mm on and joint depth from 30 mm on. The grouted stone surface remains nearly free of resin-film.


Technical data
Colorneutral/stone-grey/basalt
Compressive strength4,0 N/mm²
Ready for foot trafficafter 24 hours
Ready for full stressafter 6 days

Downloads

Additional Information

Tender Specifications

Related products

  • KOROTEX

    KOROTEX is a liquid, solvent-free, acrylic resin dispersion that after drying produces a transparent and slightly shiny film that protects the industrial floor, concrete or cement screed, effectively from premature drying out and prevents possible damage (crack formation, surface damage) due to insufficient after-treatment.

  • NEODUR HE 65 SVS 1,5

    NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualities

    • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
    • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

  • KORODUR Diamond Concrete

    KORODUR Diamond Concrete is a hard aggregate acc. to DIN 1100 (coating group KS) for the porduction of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR Diamond Concrete is mixed with cement and optionally with the additive KOROTAN.

  • KORODUR WH-Special

    KORODUR WH-Special is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3. KORODUR WH-Special ist particularly impact resistant. Although classified in group A, wear resistance values of 3 cm³/50 cm² as per group M are achieved.

    KORODUR WH-Special is mixed with cement and optionally with the additive KOROTAN.

See More