KOROCRETE is a fast-setting concrete based on KORODUR FSCem, a cementitious, dimensionally stable, fast-setting screed binder on ternary basis for the production of heavy-duty concrete floors, which are quickly usable and early ready for covering (strength classes C35/45 to C50/60 based on DIN EN 206). Due to the high early strength, the flooring areas can be used and released to traffic within a few hours after their placement. For example, this can minimize the sometimes very high costs related to down times of production and storage facilities.
KOROCRETE
For production of quickly usable concrete floors, indoors and outdoors. Repair of concrete floors with high durability due to dimensional stability and high final concrete strengths.
Categories All, Rapid concrete systems
Related products
-
KORODUR PC
KORODUR PC is a liquid, solvent-free, one-component, water dilutable, synthetic resin dispersion for pre-treatment of absorbent sub-bases for self-leveling NEODUR Level coatings.
-
KOROCURE
KOROCURE is a liquid temporary evaporation protection for intermediate curing. To protect the fresh concrete, depending on its grade, ambient and weather conditions, measures for intermediate curing should be taken acc. to DIN EN 13670:2011-03 in combination with DIN 1045-3:3012-03. The intermediate curing restrains the water in the concrete from evaporation, at wind and direct sun exposure. Thus, there is sufficient water in the concrete to allow the cement to hydrate properly.
-
NEODUR HE 65 plus SVS 3
NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities
- NEODUR HE 65 Plus: on the basis of KORODUR VS 0/5
- NEODUR HE 65 Plus SVS 3: on the basis of KORODUR WH-Special
Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.
-
KORODUR WH-metallic
KORODUR WH-metallic is a metallic hard aggregate acc. to DIN 1100 (coating group M) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.
KORODUR WH-metallic is mixed with cement and optionally with the additive KOROTAN.