KOROCLEAN
Industrial floors are extremely heavily stressed components that require special consideration both during production and cleaning, because they are subject to extraordinary wear and tear. The requirements for an industrial floor include high compressive strength, abrasion resistance, impact strength, structural density, work safety as well as appearance and cleanability. KORODUR and NEODUR hard aggregate industrial screeds meet all these requirements and offer maximum long-term benefits.
Downloads
Additional Information
Related products
-
KOROCURE
KOROCURE is a liquid temporary evaporation protection for intermediate curing. To protect the fresh concrete, depending on its grade, ambient and weather conditions, measures for intermediate curing should be taken acc. to DIN EN 13670:2011-03 in combination with DIN 1045-3:3012-03. The intermediate curing restrains the water in the concrete from evaporation, at wind and direct sun exposure. Thus, there is sufficient water in the concrete to allow the cement to hydrate properly.
-
NEODUR HE 3 SVS 1,5
For the production of heavy-duty industrial floors, e.g. car parks, industrial halls, assembly halls, aircraft hangars, workshops, high-bay warehouses and other industrial areas subjected to most severe stress. Indoors and outdoors.
-
KORODUR WH-Special
KORODUR WH-Special is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3. KORODUR WH-Special ist particularly impact resistant. Although classified in group A, wear resistance values of 3 cm³/50 cm² as per group M are achieved.
KORODUR WH-Special is mixed with cement and optionally with the additive KOROTAN.
-
KORODUR 0/4
KORODUR 0/4 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.
KORODUR 0/4 is mixed with cement and optionally with the additive KOROTAN.
