KOROCRETE is a fast-setting concrete based on KORODUR FSCem, a cementitious, dimensionally stable, fast-setting screed binder on ternary basis for the production of heavy-duty concrete floors, which are quickly usable and early ready for covering (strength classes C35/45 to C50/60 based on DIN EN 206). Due to the high early strength, the flooring areas can be used and released to traffic within a few hours after their placement. For example, this can minimize the sometimes very high costs related to down times of production and storage facilities.
KOROCRETE
For production of quickly usable concrete floors, indoors and outdoors. Repair of concrete floors with high durability due to dimensional stability and high final concrete strengths.
Related products
-
KOROCURE
KOROCURE is a liquid temporary evaporation protection for intermediate curing. To protect the fresh concrete, depending on its grade, ambient and weather conditions, measures for intermediate curing should be taken acc. to DIN EN 13670:2011-03 in combination with DIN 1045-3:3012-03. The intermediate curing restrains the water in the concrete from evaporation, at wind and direct sun exposure. Thus, there is sufficient water in the concrete to allow the cement to hydrate properly.
-
KOROTEX
KOROTEX is a liquid, solvent-free, acrylic resin dispersion that after drying produces a transparent and slightly shiny film that protects the industrial floor, concrete or cement screed, effectively from premature drying out and prevents possible damage (crack formation, surface damage) due to insufficient after-treatment.
-
KORODUR COPETTI FLOOR KCF
KCF 05 and KCF 08 are installed in one or two layers acc. to
- DIN 18560-2 screeds and heated screeds on insulation layer
- DIN 18560-3 bonded screeds with KORODUR HB 5 bonding compound (see data sheet)
- DIN 18560-4 screeds on separation layer
KCF 05 is also available as fast-setting variant as KCF 05 rapid (with dimensionally stable binder on ternary basis).
-
KORODUR WH-Special
KORODUR WH-Special is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3. KORODUR WH-Special ist particularly impact resistant. Although classified in group A, wear resistance values of 3 cm³/50 cm² as per group M are achieved.
KORODUR WH-Special is mixed with cement and optionally with the additive KOROTAN.
