KORODUR FSCem Screed is a dimensional stable, low shrinkage, fast setting screed dry mortar on ternary basis for the production of screeds that are early ready for covering, for layer thickness up to 120 mm acc. to DIN 18560 and DIN EN 13813 (quality CT-C40-F6).
For the production of cement screeds that can be quickly covered, e.g. as underlayment screed up to layer thickness of maximum 120 mm, indoors and outdoors
- on separation layer
- as bonded screed
- on insulation layer
- as heated screed
Ready for covering already after 3 days as sub-base for the application of
- KORODUR/NEODUR hard aggregate screeds
- KORODUR decorative screeds
- Coatings
- Ceramic tiles
- Natural stone tiles
- Cast concrete tiles
- Parquet and laminate
- Elastic and textile coverings
KORODUR FSCem Screed is also suitable for the repair and renovation of worn concrete floors, the repair of cementitious sub-bases for screed installation as well as for the setting of ground anchors and fence posts. KORODUR FSCem screed must always receive a covering layer.
| Technical data | |
|---|---|
| Granulometry | 0 – 6 mm |
| Compressive strength (N/mm²) measured at defined prisms acc. to DIN EN 13892-2 | after 1 day approx. 20 N/mm² after 28 days approx. 40 N/mm² |
| Flexural strength (N/mm²) measured at defined prisms acc. to DIN EN 13892-2 | after 1 day approx. 4 N/mm² after 28 days approx. 6 N/mm² |
| shrinkage class acc. to. DIN 18560-1 | SW 1 low shrinkage (< 0,2 mm/m) |
Basically the current technical data sheet refers.
Additional system components
- KORODUR Industrial floor
- KORODUR VS 0/5
- After-treatment
- KOROTEX
- Impregnation
- Surface treatment KOROCLEAN
