KOROTEX

KOROTEX is a liquid, solvent-free, acrylic resin dispersion that after drying produces a transparent and slightly shiny film that protects the industrial floor, concrete or cement screed, effectively from premature drying out and prevents possible damage (crack formation, surface damage) due to insufficient after-treatment.

SKU 1320574 Categories , ,

Acc. to DIN 18353 “Screed works” and to DIN 18560 “Floor screeds in building construction” screeds have to be protected from irregular and too rapid drying out. It is not only the correct composition of the hard aggregate mortar and skilled processing, but also the correct curing which are substantial for the quality of a KORODUR industrial floor. KOROTEX has proved its qualification already for years.

Curing with KOROTEX is specially relevant under conditions of high temperatures, low atmospheric humidity and in areas where there is a strong air draught. These circumstances influence the evaporation rate of freshly installed screeds and require professional curing, e. g. with KOROTEX. The spraying of KOROTEX is the most economical method for freshly installed screeds.

Technical data
Colour and conditionwhite liquid
Density (20°C)1,01 kg/dm³

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • NEODUR HE 65 plus

    NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities

    • NEODUR HE 65 Plus:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 Plus SVS 3:        on the basis of KORODUR WH-Special

    Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.

  • NEODUR HE 65 SVS 3

    NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualitites

    • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
    • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

  • KORODUR Diamond Concrete

    KORODUR Diamond Concrete is a hard aggregate acc. to DIN 1100 (coating group KS) for the porduction of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR Diamond Concrete is mixed with cement and optionally with the additive KOROTAN.

  • KORODUR VS 0/5

    KORODUR VS 0/5 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR VS 0/5 is mixed with cement and optionally with the additive KOROTAN.

See More