NEODUR HE 60 rapid

For the production and repair of quickly usable bonded screeds, with increased wear resistance, as industrial floors for heaviest stress, e.g. car parks, industrial halls, assembly halls, aircraft hangars, workshops, high-bay warehouses and other industrial areas subjected to most severe stress. Indoors and outdoors.

SKU 1220049S25KG Categories , , ,

NEODUR HE 60 rapid is a ready-to-use, cementitious, low-shrinkage, fast-setting screed on mineral basis with KORODUR hard aggregates acc. to DIN 1100 (groups A, M or KS) in qualities:

  • NEODUR HE 60 rapid
  • NEODUR HE 60 rapid SVS 3
  • NEODUR HE 60 rapid SVS 1,5
  • NEODUR HE 60 rapid metallic

Application
Fast-setting screed for the installation and repair of bonded screeds, which are quickly usable, early ready for covering, with increased wear resistance, as industrial floors for heaviest stress. Install thickness from 10 mm e.g. for heavy-duty industrial floors in production halls, workshops, high-bay warehouses and other industrial areas exposed to heaviest stress. Indoors and outdoors.

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

References

Renovation over the weekend, Austria

Weag disposal and recycling plant, Köngen

 

 

Related products

  • KORODUR PC

    KORODUR PC is a liquid, solvent-free, one-component, water dilutable, synthetic resin dispersion for pre-treatment of absorbent sub-bases for self-leveling NEODUR Level coatings.

  • NEODUR HE 65 plus SVS 3

    NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities

    • NEODUR HE 65 Plus:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 Plus SVS 3:        on the basis of KORODUR WH-Special

    Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.

  • NEODUR HE 65 SVS 1,5

    NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualities

    • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
    • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

  • KORODUR WH-Special

    KORODUR WH-Special is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3. KORODUR WH-Special ist particularly impact resistant. Although classified in group A, wear resistance values of 3 cm³/50 cm² as per group M are achieved.

    KORODUR WH-Special is mixed with cement and optionally with the additive KOROTAN.

See More