NEODUR PFM 1-K Easyfix

NEODUR PFM 1-K Easyfix is ready-mixed, vacuum-packed, easy to process, for the pointing and repair of paved areas. Only for use in pedestrian areas, such as e.g. terraces, walkways etc., for joint width from 5 mm on and joint depth from 30 mm on. The grouted stone surface remains nearly free of resin-film.

SKU 1220392 Categories ,

NEODUR PFM 1-K Easyfix is a ready-mixed one-component paving joint mortar.

Application
NEODUR PFM 1-K Easyfix is ready-mixed, vacuum-packed, easy to process, for the pointing and repair of paved areas. Only for use in pedestrian areas, such as e.g. terraces, walkways etc., for joint width from 5 mm on and joint depth from 30 mm on. The grouted stone surface remains nearly free of resin-film.


Technical data
Colorneutral/stone-grey/basalt
Compressive strength4,0 N/mm²
Ready for foot trafficafter 24 hours
Ready for full stressafter 6 days

Downloads

Additional Information

Tender Specifications

Related products

  • KORODUR HB 5

    KORODUR HB 5 is a mineral, ready to use bonding compound for the full bond of cementitious screeds of all grades, including KORODUR hard aggregate screeds, on set concrete.

  • KOROMINERAL CURE

    KOROMINERAL CURE is a liquid, one-component, membrane-forming curing compound to prevent premature drying out in combination with silicatization.

    KOROMINERAL CURE provides long-lasting protection against moisture, dirt and wear. The silicate penetrates deeply in the pores of the concrete, reacts with the free calcium and forms a durable bond with the concrete, both indoors and outdoors. After the application, the surface is dust-proof and water-repellent. KOROMINERAL CURE dries transparently.

  • NEODUR HE 65

    NEODUR HE 65 is a ready to use cementitious hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (groups A and KS) in the following qualities

    • NEODUR HE 65:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 SVS 3:        on the basis of KORODUR WH-Special
    • NEODUR HE 65 SVS 1,5:     on the basis of KORODUR Diamond Concrete

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

    Also available in colour, see KORODUR colour chart.

     

  • KORODUR Diamond Concrete

    KORODUR Diamond Concrete is a hard aggregate acc. to DIN 1100 (coating group KS) for the porduction of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR Diamond Concrete is mixed with cement and optionally with the additive KOROTAN.

See More