NEODUR PFM-ZE

NEODUR PFM-ZE is used for the new pointing of natural stone and concrete sett paving, linear paving and gutters in bound construction for construction classes IV to VI.

SKU 2220885S25KG Categories ,

NEODUR PFM-ZE pavement joint mortar is a factory-produced dry mortar acc. to DIN 18557 on the basis of cement and natural sand (0-2 mm) with additives to improve the properties of the mortar. Frost and deicer resistant acc. to CDF. Low chromate content acc. to TRGS 613. Non-combustible (A1) acc. to DIN 4102.

NEODUR PFM-ZE is used for the new pointing of natural stone and concrete sett paving, linear paving and gutters in bound construction for construction classes IV to VI.


Technical Data
grain size0-2 mm
colourgrey/light grey
compressive strength> 50 N/mm²
tensile strength> 7 N/mm²

Downloads

Additional Information

Related products

  • KOROMINERAL CURE

    KOROMINERAL CURE is a liquid, one-component, membrane-forming curing compound to prevent premature drying out in combination with silicatization.

    KOROMINERAL CURE provides long-lasting protection against moisture, dirt and wear. The silicate penetrates deeply in the pores of the concrete, reacts with the free calcium and forms a durable bond with the concrete, both indoors and outdoors. After the application, the surface is dust-proof and water-repellent. KOROMINERAL CURE dries transparently.

  • KOROCURE

    KOROCURE is a liquid temporary evaporation protection for intermediate curing. To protect the fresh concrete, depending on its grade, ambient and weather conditions, measures for intermediate curing should be taken acc. to DIN EN 13670:2011-03 in combination with DIN 1045-3:3012-03. The intermediate curing restrains the water in the concrete from evaporation, at wind and direct sun exposure. Thus, there is sufficient water in the concrete to allow the cement to hydrate properly.

  • GRANIDUR

    Use for polished, decorative screeds in sales rooms, museums, show rooms, boutiques, foyers, office and administrative buildings, restaurants, galleries etc.

  • KORODUR Diamond Concrete

    KORODUR Diamond Concrete is a hard aggregate acc. to DIN 1100 (coating group KS) for the porduction of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR Diamond Concrete is mixed with cement and optionally with the additive KOROTAN.

See More