NEODUR SVM 03

NEODUR fast-setting grout mortars are qualified for permabond grouting works, indoors and outdoors, for anchor and assembly holes, for grouting works under machinery equipment, high-shelf supports resp. for grouting works where high early stress is to be expected.

Categories ,

NEODUR SVM 03 are factory-produced, ready to use, highearly-strength fast-setting grouting mortars for grouting works and all kinds of assemblies.

Application
NEODUR fast-setting grout mortars are qualified for permabond grouting works, indoors and outdoors, for anchor and assembly holes, for grouting works under machinery equipment, high-shelf supports resp. for grouting works where high early stress is to be expected.


Technical data
Grain size0 – 0,5 mm
Grouting cross sectionapprox. 5 – 30 mm
Compressive strength n. 1 h> 8 N/mm²
Compressive strength n. 28 d> 55 N/mm²

Downloads

Additional Information

Related products

  • KOROPOX

    KOROPOX is a 2-component, water emulsifiable, transparent impregnation on epoxy-resin basis (concentrate) to improve surfaces of mineral sub-bases. The penetration of liquids and other dirt is reduced. The surfaces are easier to clean and become increasingly shiny. The surface remains open to diffusion.

  • NEODUR HE 65 plus SVS 3

    NEODUR HE 65 Plus is a ready to use, cementitious, synthetic-modified hard aggregate screed on the basis of KORODUR hard aggregates acc. to DIN 1100 (group A) in the qualtities

    • NEODUR HE 65 Plus:                    on the basis of KORODUR VS 0/5
    • NEODUR HE 65 Plus SVS 3:        on the basis of KORODUR WH-Special

    Installation in one layer as bonded screed for highest stress demands acc. to DIN 18560-7 on set base concrete without additional bonding compound. The bonding compound is produced from the same material, i.e. the NEODUR HE 65 Plus is applied in slurry consistency.

  • NEODUR HE 65 metallic

    NEODUR HE 65 metallic is a ready to use cementitious hard aggregate screed with metallic aggregates on the basis of KORODUR hard aggregates acc. to DIN 110 (group M) on the basis of KORODUR WH-metallic.

    Processing in one layer as bonded screed for heaviest stress demands acc. to DIN 18560-7.

  • KORODUR Diamond Concrete

    KORODUR Diamond Concrete is a hard aggregate acc. to DIN 1100 (coating group KS) for the porduction of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR Diamond Concrete is mixed with cement and optionally with the additive KOROTAN.

See More