KORODUR WH-Special

KORODUR WH-Special is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3. KORODUR WH-Special ist particularly impact resistant. Although classified in group A, wear resistance values of 3 cm³/50 cm² as per group M are achieved.

KORODUR WH-Special is mixed with cement and optionally with the additive KOROTAN.

SKU 1120009S25KG Categories , ,

KORODUR WH-Special – hard aggregate acc. to DIN 1100 – A 0/5. KORODUR WH-Special – hard aggregate based on synthetic raw materials. High quality hard aggregates classified in coating group A, specially suitable for surfaces which are subject to the most severe stress, which require high wear and tensile strength, which are particularly resistant to impact. Although classified in coating group A, KORODUR WH-Special achieves wear resistance values of 3,0 cm³/50 cm² as specified in coating group M.

Application
For use in hard aggregate concrete screeds acc. to DIN 18560-7. Extremely resistant to bumping and ramming stress. Suitable for the use in areas with heavy iron wheel traffic and impact and abrasion damage from sharp-edged machinery etc. Suitable for use on stair treads which are subject to heaviest impact and abrasion. Able to withstand the sliding and rolling of work parts, etc. plant traffic of all kind, fork-lift traffic, crawler tractor traffic. Especially qualified for loading ramps and surfaces subjects to the heaviest traffic.

Technical data
Grain size0 – 5 mm
Compressive strength70 N/mm²
Tensile strength10 N/mm²
Wear resistance≤ 3 cm³/50 cm²

Basically the current technical data sheet refers.

Additional system components

Downloads

Additional Information

Related products

  • KOROCURE

    KOROCURE is a liquid temporary evaporation protection for intermediate curing. To protect the fresh concrete, depending on its grade, ambient and weather conditions, measures for intermediate curing should be taken acc. to DIN EN 13670:2011-03 in combination with DIN 1045-3:3012-03. The intermediate curing restrains the water in the concrete from evaporation, at wind and direct sun exposure. Thus, there is sufficient water in the concrete to allow the cement to hydrate properly.

  • KOROTEX

    KOROTEX is a liquid, solvent-free, acrylic resin dispersion that after drying produces a transparent and slightly shiny film that protects the industrial floor, concrete or cement screed, effectively from premature drying out and prevents possible damage (crack formation, surface damage) due to insufficient after-treatment.

  • KORODUR VS 0/5

    KORODUR VS 0/5 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR VS 0/5 is mixed with cement and optionally with the additive KOROTAN.

  • KORODUR 0/4

    KORODUR 0/4 is a mineral hard aggregate acc. to DIN 1100 (coating group A) for the production of cementitious hard aggregate screeds acc. to DIN 18560-7 and DIN EN 13813 as well as for the production of industrial floors in dry-shake procedure acc. to DIN 18560-3.

    KORODUR 0/4 is mixed with cement and optionally with the additive KOROTAN.

See More