Rapid Set

Lowering gutters serve to drain off rainwater and are mainly used in road and path construction. They are also used for the edging of liquid-tight surfaces at fueling and washing stations to help protect the environment. Moreover, drop gutters ensure fast and safe driving over. At the service station in the Spreewald, in the truck […]

Humidity and frost are the biggest enemies of concrete and cement. This staircase shows typical signs of wear and tear as well as several weathering influences causing the edge area to become loose. With this staircase in a public area, the wellbeing and live of pedestrians is put at risk in case someone slips and

Stairs are traffic ways that are subject to high dynamic stress. In particular in outdoor areas, stairways have to withstand extreme abrasive stress caused by dirt and grit. From technical point of view, the stair nosing as the front part of the step is particularly exposed. Due to the ergonomics of the human foot, the

The influence of frost and de-icing salts, especially in winter, are the most important stress criteria for cementitious surfaces. If very intense both can cause serious damage to the surfaces. It is the duty of cities and municipalities to take care for a fast repair of such damages to ensure safety. Recently, in the city

At the German company Bohnenkamp AG a difficult task had to be solved: a 50 mm wide building separation joint with a height offset of 50 mm had to be closed by a special joint profile. Into use came a heavy-duty joint profile in a width of 230 mm. First, the concrete gap was cut

Joints in industrial floors are subject to extreme stress and must be durably protected. The design of the joints as sine curve guarantees the uninterrupted contact of industrial trucks with the joint profile and thus vibration-free driving over. To ensure smooth logistical operation, damage to the joints must be repaired promptly. Well running logistical operation

To compensate for any tension, the threshold was divided into two parts, and due to the different application thicknesses, repaired with CEMENT ALL and MORTAR MIX. Only a few hours later the garage was accessible again. A quick and easy renovation for the contractor, and a guaranteed fast re-usability for the building owner. RAPID SET

In 2014 the Federal Ministry of Transport and Digital Infrastructure issued a directive regarding headlight adjustment of vehicles during the main inspection. From 1 January 2018, at all inspection sites the existing systems for headlight adjustment are subject to verification/calibration. The allowed flatness tolerance of the sub-base for the adjustment device was defined with ±

The Raedlinger construction company is a traditional, owner-managed business that for over 55 years has been active in many fields of construction, including traffic routes and asphalt construction. For a road repair project in Nittenau/Opf., existing manholes had to be adjusted to the new asphalt level. For the first time, company Raedlinger used MORTAR MIX